更多>>联系我们
| 锁模力(Clamping Force)：35-2000 TON |
| 射出量(lnjection Capacity)：30-1800g |
| 特性(Main Features)： 直立合模，卧式射出。 Vertical clamping,horizontal injection. 射座高度可调整，镶件模具可更灵活性设计。 The position of injection unit is freely adjustable. Makes the tooling design more easlier. 可选择单、双滑板及圆盘机型，增加产能及安全性。 It is can be equipped with single/doubie skateboarding, disc, etc.,in order to improve operational safety and efficiency. |
规格 Specifcations（可选配高速射出240-1000mm/sec及伺服机）
| 参数(Parameter)\型号(Model) | UNIT | KTW-200T-H(H.S/H.SD/H.R) | ||||
 | 射出系统 | 螺杆直径 Screw Diameter | mm | 48 | 50 | 60 |
| 射出压力 Iniection Pressure | kg/c㎡ | 1600 | 1500 | 1400 | ||
| 射出量 Max.shot Weight(PS) | g | 320 | 350 | 400 | ||
| 螺杆行程 Injection Rate | mm | 200 | ||||
| 螺杆转数 Screw Speed Max | Turn | 0-260 | ||||
| 射嘴行程 Nozzie Retraction | mm | 210 | ||||
| 温度控制段数 Number of temperature Control | Snt | 4/5 | ||||
 | 锁模系统 | 锁模力 Clampinh Force | Tons | 200 | ||
| 模板尺寸 Platen Size | mm | 1100*900 | ||||
| 模柱间距 Distance Between Tie Bere | mm | 700*500 | ||||
| 最小模厚 Min.Mold Height | mm | 300/350（可根据模厚订制） | ||||
| 开模行程 Opening Stroke | mm | 280 | ||||
| 最大开模距离 Max.Open daylight | mm | 580/630 | ||||
| 顶出压力 Ejetor Force | Tons | 5 | ||||
 | 动力电热系统 | 最大液压压力 Max.Hydaulic Pressure | kg/c㎡ | 140 | ||
| 泵浦吐出量 Pump Outpet | 1/min | 73 | ||||
| 马达电力 Pump Motor Power | kw/HP | 18.5/25HP | ||||
| 电热容量 Berrel Heating Power | kw | 11 | ||||
| 总用电量 Total Weight | kw | 31.5 | ||||
 | 其它 | 机器重量 Machine Weight | kg | 13500 | ||
| 机器外型尺寸 Machine Dimensions(L*W*H) | m | 5*2.1*3.6 | ||||
规格若有修改，恕不另通知！Specifcations are subject to change without prior notice!
|
中文版
English